Basic Cisco Configuration Howto
How to configure a basic cisco router with static routing and rudimentary security.

Simple AS Howto
An simple introduction to BGP multihoming, showing how to create a simple AS from either one or two border routers.

Transit AS Howto
How to build a scalable transit AS utilising OSPF, BGP, route-maps and engineering communities. Assuming a small amount of existing BGP knowledge, this document explains some useful concepts when designing and maintaining a transit AS.

IPv6 Dual-Stack Deployement with IS-IS and BGP
An example IPv6 deployement scenario across an existing Cisco IPv4 network using dual-stacking, BGP and IS-IS.

BGP Traffic Engineering Guide
A companion to the Simple AS Howto, this document explains how to use your upstream provider's BGP engineering communities facility to control your announcements and which routes you use as best-path.

Global IX Howto
A theoretical guide on designing and implementing a global layer 2 peering point across a VPLS service.

Systems Documentation

CUFlow and Flow Tools Howto
This document is intended to walk you through the installation of a NetFlow collector and statistics processor using a Debian GNU/Linux server, flow-tools, flowscan and CUFlow. The setup will allow you to monitor which specific hosts, subnets, TCP/UDP ports/services, TOS classes or IP protocols are using bandwidth on your network for billing, diagnostic or information only purposes, along with a complete historical record.